Swamp Outlaw 1980-83 Honda ATC 185 4x130 To 4x156 Front Wheel Adapter Kit
Swamp Outlaw Lifts
Front Wheel Hub Adapters
Where to Use: These adapters are the answer to the many questions about how to mount an aftermarket wheel on the front of a Honda ATC 185 and 200. We designed these hub adapters to both center the front wheel and also use a common size aftermarket wheel. Honda used an oddball size bolt pattern 4x150 and 4x130 on the 185 and 200. Every other Honda uses the 4x110 bolt pattern. These are the perfect fit for your custom build.
Wheel Offset: We designed these adapters to center a 5+2 offset wheel in the front forks. This is the most common and easy to find offset wheel especially in the Polaris and Can-am market. Our goal is to be able to find an affordable set of mud tires and bolt them right to your ATC as easily as possible! Other offsets and wheels may work with enough creativity and fabrication. But for a direct bolt on we do suggest a 5+2 offset.
Rear Wheels: The rear wheels are very simple! 400EX rear hubs are a direct fit on the factory splines for the rear. These are a 4x110 bolt pattern and can accept most Honda wheels. For Polaris or Can-am wheels we suggest ordering aluminum adapters when you order the 400EX hubs. Both the rear hubs and the adapters are very affordable on Ebay and Amazon. If you're ordering brand new wheels and have the option, We suggest a 2+5 wheel because it will help to widen the machine and limit the use of extra spacers.
Options: To make everything simple we are offering these in the following sizes!
4x130 - 4x110 (ATC 185 to Honda) SO-130-110
4x130 - 4x137 (ATC 185 to Can-am) SO-130-137
4x130 - 4x156 (ATC 185 to Polaris) SO-130-156
4x150 - 4x110 (ATC 200 to Honda) SO-150-110
4x150 - 4x137 (ATC 200 to Can-am) SO-150-137
4x150 - 4x156 (ATC 200 to Polaris) SO-150-156
Installation: To install adapter simply remove existing studs from the factory hub and bolt on new adapter using the supplied hardware. (Kit includes mounting hardware and matching lug nuts)
Swamp Outlaw Lifts
Front Wheel Hub Adapters
Where to Use: These adapters are the answer to the many questions about how to mount an aftermarket wheel on the front of a Honda ATC 185 and 200. We designed these hub adapters to both center the front wheel and also use a common size aftermarket wheel. Honda used an oddball size bolt pattern 4x150 and 4x130 on the 185 and 200. Every other Honda uses the 4x110 bolt pattern. These are the perfect fit for your custom build.
Wheel Offset: We designed these adapters to center a 5+2 offset wheel in the front forks. This is the most common and easy to find offset wheel especially in the Polaris and Can-am market. Our goal is to be able to find an affordable set of mud tires and bolt them right to your ATC as easily as possible! Other offsets and wheels may work with enough creativity and fabrication. But for a direct bolt on we do suggest a 5+2 offset.
Rear Wheels: The rear wheels are very simple! 400EX rear hubs are a direct fit on the factory splines for the rear. These are a 4x110 bolt pattern and can accept most Honda wheels. For Polaris or Can-am wheels we suggest ordering aluminum adapters when you order the 400EX hubs. Both the rear hubs and the adapters are very affordable on Ebay and Amazon. If you're ordering brand new wheels and have the option, We suggest a 2+5 wheel because it will help to widen the machine and limit the use of extra spacers.
Options: To make everything simple we are offering these in the following sizes!
4x130 - 4x110 (ATC 185 to Honda) SO-130-110
4x130 - 4x137 (ATC 185 to Can-am) SO-130-137
4x130 - 4x156 (ATC 185 to Polaris) SO-130-156
4x150 - 4x110 (ATC 200 to Honda) SO-150-110
4x150 - 4x137 (ATC 200 to Can-am) SO-150-137
4x150 - 4x156 (ATC 200 to Polaris) SO-150-156
Installation: To install adapter simply remove existing studs from the factory hub and bolt on new adapter using the supplied hardware. (Kit includes mounting hardware and matching lug nuts)
Swamp Outlaw Lifts
Front Wheel Hub Adapters
Where to Use: These adapters are the answer to the many questions about how to mount an aftermarket wheel on the front of a Honda ATC 185 and 200. We designed these hub adapters to both center the front wheel and also use a common size aftermarket wheel. Honda used an oddball size bolt pattern 4x150 and 4x130 on the 185 and 200. Every other Honda uses the 4x110 bolt pattern. These are the perfect fit for your custom build.
Wheel Offset: We designed these adapters to center a 5+2 offset wheel in the front forks. This is the most common and easy to find offset wheel especially in the Polaris and Can-am market. Our goal is to be able to find an affordable set of mud tires and bolt them right to your ATC as easily as possible! Other offsets and wheels may work with enough creativity and fabrication. But for a direct bolt on we do suggest a 5+2 offset.
Rear Wheels: The rear wheels are very simple! 400EX rear hubs are a direct fit on the factory splines for the rear. These are a 4x110 bolt pattern and can accept most Honda wheels. For Polaris or Can-am wheels we suggest ordering aluminum adapters when you order the 400EX hubs. Both the rear hubs and the adapters are very affordable on Ebay and Amazon. If you're ordering brand new wheels and have the option, We suggest a 2+5 wheel because it will help to widen the machine and limit the use of extra spacers.
Options: To make everything simple we are offering these in the following sizes!
4x130 - 4x110 (ATC 185 to Honda) SO-130-110
4x130 - 4x137 (ATC 185 to Can-am) SO-130-137
4x130 - 4x156 (ATC 185 to Polaris) SO-130-156
4x150 - 4x110 (ATC 200 to Honda) SO-150-110
4x150 - 4x137 (ATC 200 to Can-am) SO-150-137
4x150 - 4x156 (ATC 200 to Polaris) SO-150-156
Installation: To install adapter simply remove existing studs from the factory hub and bolt on new adapter using the supplied hardware. (Kit includes mounting hardware and matching lug nuts)
