Honda 4x110 Axle Paddle Kit
Want to dig through the thickest mud?
Checkout these bolt on axle paddles! These are specifically designed to fit over the TRX style hubs commonly used on the back of lifted chain drive 185 / 200 model Honda 3 wheelers as well as the 1984 200ES Shaft drive. These are laser cut from 3/16” steel and powder coated black!
This design allows you to use either the factory replacement TRX hubs or the Tusk extended aluminum hubs. The paddle simply slides over the face of the hub and fits between the wheel and hub face.
Minimum wheel Requirement : 12” 5+2 Offset
More effective with 2+5 wheels as more of the paddle is exposed
Fits the following machines using TRX Style hubs and a 12” Wheel:
ATC 185
ATC 185S
ATC 200
ATC 200E
ATC 200M
ATC 200ES
As well as many more!
These will not fit Big Red 250ES, May fit other Honda models where TRX hubs are use
Want to dig through the thickest mud?
Checkout these bolt on axle paddles! These are specifically designed to fit over the TRX style hubs commonly used on the back of lifted chain drive 185 / 200 model Honda 3 wheelers as well as the 1984 200ES Shaft drive. These are laser cut from 3/16” steel and powder coated black!
This design allows you to use either the factory replacement TRX hubs or the Tusk extended aluminum hubs. The paddle simply slides over the face of the hub and fits between the wheel and hub face.
Minimum wheel Requirement : 12” 5+2 Offset
More effective with 2+5 wheels as more of the paddle is exposed
Fits the following machines using TRX Style hubs and a 12” Wheel:
ATC 185
ATC 185S
ATC 200
ATC 200E
ATC 200M
ATC 200ES
As well as many more!
These will not fit Big Red 250ES, May fit other Honda models where TRX hubs are use
Want to dig through the thickest mud?
Checkout these bolt on axle paddles! These are specifically designed to fit over the TRX style hubs commonly used on the back of lifted chain drive 185 / 200 model Honda 3 wheelers as well as the 1984 200ES Shaft drive. These are laser cut from 3/16” steel and powder coated black!
This design allows you to use either the factory replacement TRX hubs or the Tusk extended aluminum hubs. The paddle simply slides over the face of the hub and fits between the wheel and hub face.
Minimum wheel Requirement : 12” 5+2 Offset
More effective with 2+5 wheels as more of the paddle is exposed
Fits the following machines using TRX Style hubs and a 12” Wheel:
ATC 185
ATC 185S
ATC 200
ATC 200E
ATC 200M
ATC 200ES
As well as many more!
These will not fit Big Red 250ES, May fit other Honda models where TRX hubs are use
