Shop Our Custom Products
FEATURED PRODUCTS
Are you tired of trying to find that straight original front rack for your Big Red 250ES? Or you just
don't want to bend that OEM rack? We have the fix! Check out our new replacement front rack!
These racks are 100% bolt on and ready to go. This front rack is CNC laser cut from 7ga steel
and powder coated in a heavy duty texture black finish. This rack is manufactured right here at
our shop in Minnesota.
Here is the best part! When we developed this rack we had accessories in mind. We have direct
bolt on brackets that allow you to use a winch or light bar with no modification required! Make
sure to check out our other listings for the bolt on winch mount and light bar mount.
This rack fits:
1985-87 Honda® Big Red 250ES
Are you tired of constantly working on your old drum brakes? It's time to upgrade to the Swamp Outlaw Disc Brake Kit! This kit includes the steel brackets and all the necessary hardware to install, Brake components are sold separately and listed below! This gives you the option to run OEM Honda components or the replacement parts available online. This is a simple bolt in kit with no cutting or welding required. This kit was originally designed and built by Brad Rye and has many years of proven testing in the ATC community!
The FRONT disc brake kit fits the 1985-87 Big Red 250ES
NOTE: Will NOT work with the factory 9” Wheel. Requires 12” or larger Diameter Wheel
You'll need the following parts in addition to the Disc Brake Bracket Kit:
-2004-2017 CRF 450 Front Brake Rotor - OEM# 45351-KZ4-J30
-2004-2017 CRF 450 Front Brake Hose - OEM# 45125-MEN-003
-Honda Rancher 350 Master Cylinder Brake Lever - OEM# 45510-5-671
Thank you for choosing Swamp Outlaw for all your Custom parts!
Swamp Outlaw Lifts
1980-86 Honda ATC 185/200 Chain Drive
Thank you for using Swamp Outlaw to lift your Honda ATC! Please read through this before ordering as there are several options and parts required to complete your build. For more information on lift kits make sure to follow the Swamp Outlaw Facebook page.
This kit includes the Front and Rear Lift for for the 200S, 200M, 185S and ATC 200 with suspension forks. If your building a 200E or early 185/200 with solid forks this kit wont work. You will need to order the Rear Only and make the selection for your front suspension.
Want to dig through the thickest mud?
Checkout these bolt on axle paddles! These are specifically designed to fit over the TRX style hubs commonly used on the back of lifted chain drive 185 / 200 model Honda® 3 wheelers as well as the 1984 200ES Shaft drive. These are laser cut from 3/16” steel and powder coated black!
This design allows you to use either the factory replacement TRX hubs or the Tusk extended aluminum hubs. The paddle simply slides over the face of the hub and fits between the wheel and hub face.
Minimum wheel Requirement : 12” 5+2 Offset
More effective with 2+5 wheels as more of the paddle is exposed
Fits the following machines using TRX Style hubs and a 12” Wheel:
ATC 185
ATC 185S
ATC 200
ATC 200E
ATC 200M
ATC 200ES
As well as many more!
These will not fit Big Red 250ES, May fit other Honda® models where TRX conversion hubs are used
$35 Flat Fee Shipping to HI, AK, and Canada
Easy Flat Rate Shipping All orders $12.95 Shipping in the Lower 48
1985-1986 Honda ATC 350X
Compete Frame Gusset Kit
Installing a gusset kit into your Honda ATC 350X is one of the most important things to do during your restoration. During your restoration process it is very important to closely inspect your frame for cracking. There are several areas where cracks are very common. Frame repair is nothing to worry about with this complete Gusset kit from Swamp Outlaw. This complete kit reinforces all of the common areas of failure as well as adding much needed strength to the frame. We designed this kit with a finished look in mind. With ATC restorations becoming more common we needed a kit that would add strength and maintain a factory appearance. This gusset kit is CNC cut from 14 ga. steel and utilizes dimples to both add strength to the part and give it a finished look. The 14 ga. material matches the thickness of the frame tubes on the 350X making this a very easy kit to install. This is the perfect kit for both restorations and full race builds. These kits have been shipped all around the world and are proven to be a perfect fit and adds all the needed strength to your Honda 350X. Fits the Following;
1985-1986 Honda ATC 350X
Note; Welding is required for installation. Complete detailed instructions are included with the kit. These are sold in bare metal for welding.
***THIS KIT IS NOT AVAILABLE FOR SHIPPING TO CANADA***
Check out our Complete Kit to build your Honda Big Red 250ES!
This completely bolt in kit is the one click answer you're looking for! You get a 2” Lift Kit, Front Disc Brake Kit, Steel Skid Plate, Bolt on Peg extensions and most importantly brand new wheels and tires! This is everything you need to build your Honda Big Red!
This kit fits - 1985-1987 Honda Big Red 250ES
Wheels and Tires
These wheel s and tires are the perfect fit for your Big Red 250ES. The 27” Tire is the ideal size for a Big Red with the 2” Lift! The 4x110 wheels are shipped in the correct offset to center the front wheel with no adapters or spacers required. Just bolt on and go! I like the look of a 1.5” spacer on the rear wheel but it's not required.
Wheels and Tires will require mounting - Includes lug nuts and rear center caps
Disc Brake Kit
This Front Disc Brake kit is a huge upgrade from the factory drum brake! Especially when running the larger wheels and tires. This is a bracket kit only and will require the additional purchase of the following items. This gives you the option to use OEM or eBay/Amazon Replacement;
2004-2017 CRF 450 Front Brake Rotor - OEM# 45351-KZ4-J30
2004-2017 CRF 450 Front Brake Hose - OEM# 45125-MEN-003
2004-2017 CRF 450 Front Brake Caliper OEM# 45150-MEN-006
Honda Rancher 350 Master Cylinder Brake Lever - OEM# 45510-5-671
Additional Swamp Outlaw Kits Included;
Lift Kit
Skid Plate
Foot Peg Extensions
YouTube Video With More Details and Build Advice;
These are some of the most popular products we offer for the Big Red 250ES in one build package! These are simple bolt on parts and include all the required hardware. Most importantly these and our disc brakes are all manufactured in house at our shop in Minnesota!